Home / Forums / DynamiX Support / Skin sizing problem

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts

  • Cameron Hadden
    Participant

    I'm having problems getting the inner and outer skins on my pages being the same size.  Meaning the thickness of the outer skin and thickness of the inner skin.  Please help.

    Andy
    Andy
    Keymaster

    Hi Cameron,

    I'm not sure what you mean, can you post a graphic mockup?


    Cameron Hadden
    Participant

    http://newpointchurch.net/

    http://newpointchurch.net/?page_id=549

    If you will notice how the mustard outer skin is not as wide on the two pages.  If the outer skin on the home page is wider because of the 3d slider that is ok but the outer skin on all of the other pages isn't wide enough for our logo.  Make sense?

    Andy
    Andy
    Keymaster

    That's unfortunately the way it is, if you add a gallery it creates more space but all other pages the height is decreased so the content is at easier reach to the user. 


    Cameron Hadden
    Participant

    is there any way that I can raise the height of my logo?

    Andy
    Andy
    Keymaster

    It seems to fit fine? You can increase the logo area – see this page. http://help.themeva.com/how-to-guides/dynamix-how-to-guides/change-logo-size/


    Cameron Hadden
    Participant

    by increasing the logo area will that in turn cause the top outer skin to be pushed down lower?  Meaning will that put the logo completely in the mustard color?

    Andy
    Andy
    Keymaster

    No unfortunately not, as said they are sized based on whether you're using a Gallery or not. Do you need it bigger than it currently is?  

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.